Grout Rescue Colour & Seal
£21.00 inc. VAT
Grout Rescue Colour & Seal
Specialist Grout Colourant, Renew, Sealer & Dye
We strongly recommend that you prime the surface with Grout Rescue Pre-Treatment before application for optimum results and most accurate colours, whether the grout is new or old.
The colour chart must be used as a guide only; due to the original grout colour, texture, grout width, artificial and natural lighting the finished Grout Rescue colour may dry slightly different once applied – as an example, applying a grey grout to white tiles will make the grout look darker due to the contrast of light and dark, whereas if you apply mid grey grout colouring to pure black tiled surfaces, then the grey grout will look lighter in contrast to its surroundings.
Our policy is that we cannot guarantee an exact 100% match and you should chose a grout colour that MOST CLOSELY MATCHES the colour scheme you want to achieve. Always do a small on-site test in an inconspicuous area so you can assess the results BEFORE undertaking the grout colour seal process.
|Dwell Time:||30-60 mins|
|Application Method:||Sponge / Pad / Brush|
|Safety Data Sheet|
|Technical Application Guide|
Universeal Grout Rescue Colour & Seal Grout Colour Sealer is a great way to restore and renew your wall and floor grout to a better than new condition.
For Internal Use Only
Grout Rescue Colour & Seal grout dye is available in 10 stylish colours, when fully cured, permanently seals the grout to help protect against mould, mildew and staining for up to 15 years.
In many instances when the grout has become permanently stained and no amount of cleaning can bring back the original uniform clean look of the grout. In these cases it is best to apply Universeal Grout Rescue Colour & Seal to restore the grout to a permanently sealed even coloured finish.
Grout Renew to Look Like New!
Our unique grout stain, colourant dye, and sealer can restore even the dirtiest, damaged and ugly grout to a new look finish. This process will permanently colour and seal the grout to make the grout look even better than the day it was installed. Universeal Grout Rescue Colour & Seal Grout Colour Sealer is safe and simple to use, this unique formula allows for easy application by the professional tradesman and DIY homeowner.
Important Note: The colour chart must be used as a guide only. Due to the original Grout colour, texture, grout width, artificial and natural lighting the finished Grout Rescue stain colour may dry slightly different once applied. Always do a small test of our grout stain dye and colourant prior to use to check suitability. Our colour chart must be used as a guide only; due to the original grout colour, texture, grout width, tile colour, artificial and natural lighting the finished Grout Rescue colour may dry slightly different once applied. Always do a small on-site test prior to use. If you require further support or guidance, please contact our technical helpline on 01300 345 898 (ext 2).
See our Grout Stain in action (HD video)
If you are looking to change the colour or renew your external grout, you should consider our all new outdoor grout and pointing colour seal formula, Grout Rescue X Colour Sealer. Designed to renew and protect external grouting or pointing, it is ideal for outdoor tiling, patios and paving (5 colours).
Directions for use
NOTE: Due to our improved formula’s high polymer strength, you must complete a test patch to determine how long the product can be left on the surrounding tiles. Depending on the type of tile, you may need to remove the product excess within 5-10 minutes or it may be possible to leave up to 30 minutes – note, if left too long it will be extremely difficult to remove.
For best results, we recommend a two stage process:
Stage 1: Prime the grout surface area on both old and new installations with Grout Rescue Pre‑Treatment.
Stage 2: Apply Grout Rescue Colour & Seal when the grout joints are clean and thoroughly dry.
- Shake bottle & mix well before use. If using more than 1 bottle of a single colour for an application, mix all material to ensure colour match and consistency. Make sure the grout joint is clean and thoroughly dry before applying Grout Rescue.
- Gently squeeze the bottle to apply steadily and consistently onto the grout joint using your preferred application tool, eg a small, stiff brush or sponge working it evenly onto the grout surface. Wipe away any excess sealer from the tile surface within the timeframe established from project test (as a guide, within 30 minutes or less). Work in small manageable areas whilst applying and cleaning down – your test patch will dictate when to halt application to remove excess.
- Allow 48 hours drying time before wetting (using shower room) or cleaning the treated grout area.
Poor application, applying the grout colourant too heavily or thickly onto the grout joint can result in blistering, cracking and de-bonding of the colour sealer. This product is not recommended for use around porous surfaces i.e. unglazed tiles and natural stone surfaces as it could permanently stain. FOR INTERNAL USE ONLY.
How to Change Grout Colour with our Grout Stain
Step 1: Prepare the grout surface
Clean and prime the grout first with a grout cleaner to remove the worst dirt and grime that may be present. We recommend Universeal Grout Rescue Pre-treatment for maximum effectiveness.
Step 2: Apply the cleaner and agitate
Spray in Grout Rescue Pre-treatment and leave to dwell for the required time. Then agitate with a small brush to clean the grout lines and remove stubborn deposits.
Step 3: Wipe and dry
Using a damp sponge and a clean dry cloth, remove any remaining Grout Rescue Pre-treatment to make sure the surface is clear of artefacts and completely dry for the next stage.
Step 4: Ready your brush!
With a clean and dry surface, it’s time to apply Universeal Grout Rescue Colour & Seal. Use a small clean brush to get the best results using our grout dye. A disposable toothbrush is an affordable choice for the job.
Step 5: Apply our grout dye and sealer to the grout
Apply Universeal Grout Rescue Colour & Seal to the grout joints with the brush. Don’t worry too much about getting a little of the grout stain and dye onto the tiles, this will be removed safely soon! DO NOT OVER-APPLY, make sure you spread it out thinly and evenly with the brush.
Step 6: Wet and wipe
After leaving Universeal Grout Rescue Colour & Seal to dwell (time determined by test application but as a rule, 30 minutes or less), wet the tiles with some clean water, ideally from a mist sprayer. Then gently rub over the tiles with a grout scouring pad or non-abrasive scourer.
Step 7: The finishing touches
Wipe the grout colourant residue away with a clean absorbent sponge or cloth. Wipe repeatedly while rinsing with clean water to remove all remaining traces of grout dye from the tiles and grout. Then buff dry with a soft cloth for a perfect finish!
- Colours and Seals Grout in one application
- Restore even the dirtiest, damaged and ugly grout to a new look finish
- 10 harmonious colours from light to dark
- For internal use
- Up to 15 years protection
A wide range of colour choices
Now, you can colour your grout work with our range of stylish colours, as shown in our swatch set we’ve pre-selected a good range of 10 colours in popular tints.
To avoid disappointment, please note: We do not manufacture sample bottles or provide smaller sizes. The swatches provide a near match to the actual product, however, as you may expect, screen displays and print processes cannot match the colours 100% accurately, so if colour matching is crucial, we recommend you find a stockist and see the product colours in store. We will not be responsible for any colour matching problems as it remains the final responsibility of the user to confirm colour suitability.
3-15m2 per 237ml bottle
This will vary dependent on tile size & grout width.
IMPORTANT: WE ARE UNABLE TO ACCEPT RETURNS OF OPENED PRODUCT. Please ensure you are happy with your colour choice prior to opening the bottle
SUGGESTED FIRST AID PROCEDURES
EYE AND SKIN CONTACT: Flush thoroughly with water, if irritation persists seek medical attention.
IF INGESTED: Drink 1 to 2 glasses of water, do not induce vomiting and seek medical attention.
GROUT RENEW STORAGE INFORMATION
Product shelf life is 36 months when unopened and stored at room temperature. Store product in original container only. Close cap on container after each use. Use only when surface temperatures are between 50° F – 90° F (10° C – 32° C).
Latest Product Reviews…
|Dimensions||5 × 5 × 14 cm|
Black, Dark Grey, Mid Grey, Light Grey, White, Ivory, Limestone, Sandstone Beige, Cappuccino, Chocolate
Will Grout Rescue work on new grout?
Yes, Grout Rescue Colour & Seal is suitable for both brand new and older grout installations. It permanently colours and seals the grout, applying the chosen colour for a consistent coloured finish.
How much will one 237ml bottle of Grout Rescue cover?
A standard 237ml bottle of Grout Rescue Colour & Seal will cover between 3 – 15m2. Product coverage will vary due to the grout width, density, texture and the surface absorbency.
For specific coverage guidelines, download our Product Guide (PDF format).
If I forget to remove the Grout Rescue from the tiles, will it stain?
Yes! Be careful and make sure you follow the instructions to ensure that the excess product is removed from the tile surface promptly. Once it dries, Grout Rescue Colour & Seal is a permanent seal and can only be removed with powerful solvent strippers, such as Universeal Pro-Strip.
How do I guarantee Grout Rescue colour consistency?
If you are undertaking a large project requiring multiple bottles of a colour, it is recommended that you empty all the individual bottles of Grout Rescue Colour & Seal into a larger container and mix well, this will create a consistent colour for the entire application.
Do you accept returns/refunds with Grout Rescue?
Due to the nature of Grout Rescue Colour & Seal, we cannot accept returns of any opened product. If you have ordered too much and have unused bottles, then yes, you may return those for a refund.
Please note that you must bear the costs of returning the product to us. Our address can be found here.
Can I order a custom colour for my grout?
Yes, if you need a larger order of Grout Rescue Colour & Seal in a specific colour for a commercial project we can create a custom tint for you. A minimum quantity order applies and we will colour match your supplied colour swatch as closely as possible (limitations apply). Please contact us on +44 (0) 1300 345 898 to discuss your requirements.
Will I need to re-apply Grout Rescue?
Grout Rescue Colour & Seal is a durable, permanent sealer and should provide long-term colour protection. Depending on the type of cleaning products used, a fresh application may be required within 2 years, particularly if the cleaners use harsh chemicals as these attack the surface of the sealed grout.
We recommend that you use pH neutral cleaning products, such as Universeal Easy Clean to achieve long-life protection.
Is Grout Rescue suitable for outdoor use?
Grout Rescue Colour & Seal should not be used for outdoor applications as we recently revamped its polymer formulation for optimal internal results. We have a new external patio grout restoration and recolour formula coming very soon that is specially formulated with super strong polymers to guarantee its longevity in the face of environmental impacts relating to outdoor exposure.