Super Intensifier

Universeal Super Intensifier

Victorian Tile colour intensifier sealer

Usage Guidelines

---

Coverage:	Up to a maximum of 30m2 per litre per coat Coverage offered as guidance. Will vary depending on surface porosity, texture and application process.
Drying Time:	1 hour between coats, fully cured 48-72 hours
Applications/Coats:	2 Coats
Application Method:	Sponge / Sprayer / Brush / Paint Pad
Dilution:	Undiluted

Documentation

---

Technical Application Guide

Max Colour Enhancer for natural stone & porous tile

Universeal Super Intensifier’s new colour enhancer technology is designed to massively deepen tile colour and stone’s natural hues. This tile colour intensifier is perfect for restoring old and faded Victorian tiles.

Super Intensifier indoor tile colour restorer is a high-performance solvent-based max colour enhancer that penetrates into the surface to protect from staining whilst giving a bold, deeply colourful look. The high polymer formula is ideal for the restoration of Victorian Tiles and suitable for all porous stone and tile surfaces. NOT RECOMMENDED FOR USE ON NON-POROUS, GLAZED SURFACES.

Special Features

• Boosts natural colours and restores faded colours for a deep, vibrant look
• For use on Victorian Tile, geometric tile and all natural porous stone surfaces including commonly installed sandstone, slate, limestone and more
• Can be applied internally & externally
• Protective coating helps to prevent stains and retain colour
• 100% breathable, polymer-rich impregnating solvent formula

DIRECTIONS FOR USE:

1. Read these instructions fully. Always perform a test in an inconspicuous area on-site to check the suitability of the product, prior to use. ALWAYS WEAR APPROPRIATE PPE DURING APPLICATION.
2. Before application, the surface must be completely clean and dry.
3. Apply an even coat with a low-pressure sprayer, paint pad, natural fibre brush or sponge. The sealer will sink (impregnate) into the stone; any excess sealer must be completely removed from the surface within 15 minutes by buffing off with a lint-free cloth.
4. After at least 1 hour, apply a second thin and even coat, again taking care to buff off any excess sealer with a cloth within 15 minutes. The finished result will be a matt, non-shine finish with deep, vibrant colouration (mid to dark tones will show the most dramatic results).
5. After application, the stone surface must be kept dry through the curing process (up to 72 hours). Any moisture or water left on the surface within this time may result in the sealer drying inconsistently, leading to hard-to-remove white patches.

Please Note:

Application range: 5°c – 20°c. Areas not to be sealed with Super Intensifier indoor tile colour restorer must be protected with masking materials.

Expected Wear

Under typical conditions, the effect of the impregnation can be considered to have an effect for up to 5 years. Effectiveness and longevity are reliant on initial thorough application, foot traffic and the use of correct maintenance cleaning products.

Stain Protection

Please note that sealing your paving or tiled surfaces does not guarantee complete stain prevention. However, when applied correctly, a quality sealer will significantly enhance your surface’s appearance and durability, making regular cleaning and maintenance much easier.

If surface marks or stains do appear, they can usually be removed with the appropriate cleaning products and methods. For technical advice or support, please contact us on 01300 345898.

Coverage:

Up to a maximum of 30m2 per litre per coat.
Coverage is offered as guidance. Will vary depending on surface porosity, texture and application process.