Resin-Off Residue Remover

Universeal Resin-Off

Polymer & Sealer Residue Remover

Usage Guidelines

---

Dwell Time:	15-20 mins
Applications/Coats:	1-2 Applications
Application Method:	Sponge / Roller / Brush
Dilution:	undiluted

Documentation

---

Technical Application Guide

Advanced formula For removing problematic residues

Universeal Resin-Off is a specialist stripping formula for the targeted removal of resins and jointing mortar residues from patios and paving. Can also remove excess sealer deposits.

Universeal Resin-Off is for the removal of jointing mortar residues, excess resins and sealants, coatings, adhesives and plastic residues from all types of external stone surfaces. This easy to apply gel-like fluid allows you to target specific patches with minimal mess and wastage.

Special Features

• Designed to remove polymer hazes, films and residues from jointing mortars, resins and surface sealants
• Ready to use, gel-like formula
• Suitable for porcelain tiles and other porous natural and artificial stones
• Highly effective remover – works in less than 20 minutes

Tester Sizes Available: Our affordable tester sizes allow you to check the product’s suitability, appearance and performance before purchasing larger volumes. As recommended in our Directions of Use, always test on a small inconspicuous area or spare offcut first. Please note: tester/sample sizes (25ml & 150ml) are non-returnable.

DIRECTIONS FOR USE:

1. Always perform a small test patch on your surface to establish timing and effectiveness of results. ONLY when you have successfully completed this process should you proceed.
2. Prepare the area by cleaning off loose debris and ensure you have adequate personal protection, ie gloves, suitable protective eye-wear, face mask & clothing.
3. Pre-wet the surface area. Apply Resin-Off to the affected areas and leave to dwell for 15-20 minutes maximum. Agitate with a stiff brush or decking brush and wash off. After rinsing, you may pressure wash for faster results.
4. After allowing the surface to dry, inspect and if any stubborn patches remain you may repeat the process.

Please Note:

Do not apply Resin-Off until you have completed a test patch and made sure of the effectiveness and end result on your surface.
Cover areas not to be treated with suitable protective materials. Apply between 5° C and 20° C.

Coverage:

Apply neat – approx 5-10m2 per litre.
Coverage offered as guidance. Will vary depending on surface porosity, texture and application process.

External Chemicals: Handling

Please note, our outdoor chemicals must always be handled with care. Upon receipt of your goods, you should open the packaging in a safe, suitable outdoor environment. Despite our best efforts with robust, layered packaging, there is always a small risk that damage or leakage could occur during transit. Our chemicals have the potential to damage sensitive surfaces if left unattended and we do not recommend that you store them indoors unless specifically indicated.

KEEP OUT OF THE REACH OF CHILDREN AND PETS

H314: Causes severe skin burns and eye damage.

P102: Keep out of reach of children.
P264: Wash hands thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321: Specific treatment (see instructions on this label).
P405: Store locked up.

Product SDS sheet available upon request.