Ultra Wet look Sealer

£7.00£215.00 inc. VAT

4.9782608695652 out of 5 based on 46 customer ratings
(46 customer reviews)

ultra wet look sealer - 5yr performance guarantee

ULTRA Wet Look Sealer

Ultimate 2 in 1 colour enhancing, high gloss wet look finish sealant

Guaranteed 5+ years lifespan for colour enhancement

Description

Leave us a review

Universeal Wet Look Sealer

High Gloss & Colour finish

Usage Guidelines


Coverage: Up to a maximum of 25m2 per litre per coat
Coverage offered as guidance. Will vary depending on surface porosity, texture and application process.
Drying Time: 45-60 mins
Applications/Coats: 2 Coats
Application Method: Sponge / Sprayer / Brush
Dilution: Undiluted

Documentation


Download a PDF Technical Application Guide

2 in 1 sealer for natural stone surfaces

Universeal ULTRA Wet Look Sealer is our ultimate 2-in-1 impregnating formula to boost natural colours & hues and impart a very strong ‘wet look’ glossy effect.

Universeal’s ULTRA Wet Look Sealer 100% active, low-odour solvent-based sealer offers ultimate protection from staining and soiling whilst offering a greatly enhanced colour boost effect. 2 coats will yield an intense wet look finish that brings out the stone’s natural hues. Suitable for new patios and also restores faded paving. NOT RECOMMENDED FOR USE ON NON-POROUS, GLAZED SURFACES SUCH AS CERAMIC OR PORCELAIN TILES.

Special Features

  • Ultimate 2-in-1 sealing power with 100% active low odour solvent breathable formulation – imparts strong water and stain repellency
  • Suitable for indoor & outdoor uses, including patios, driveways, paths, garages, cladding, façades, floors, worktops, kitchens and more
  • Minimum 5-Year Performance Guarantee
  • 1st coat for high intense colour enhancement, 2nd coat for ultimate wet look and high gloss finish
  • Suitable for all types of porous natural stone: slate, limestone, sandstone, black limestone, plus terracotta, quarry tile, brick, concrete, polished concrete, terrazzo and even grouting and pointing
  • Low odour 100% breathable solvent formula

Universeal Patio Stone Sealer Wet Look
If you are looking to achieve a less shiny, more darkened “water saturated with bold colour” look, you should consider our advanced water-based impregnating formula, Patio Stone Sealer Wet Look Finish.

DIRECTIONS FOR USE:

  1. Always perform a test in an inconspicuous area on-site to check the suitability of the product, prior to use – read these instructions fully before application. Before application, the surface must be completely clean and dry.
  2. To achieve colour enhancement: Apply a thin, even coat with a low-pressure sprayer, paint pad, natural fibre brush or sponge (we do not recommend using a roller as it makes the sealant ‘foam’ and can lead to an inconsistent, overly heavy application). Any excess sealer must be completely removed from the surface within 15-30 minutes to dry to a flat matt finish.
  3. For ultimate wet look: apply a second coat after 60 minutes, with a thin and even application. Leave to dry on the surface (takes up to 12 hours to dry tack-free). The end result will be a high gloss, high colour-enhanced finish.
  4. After application, it is important the stone surface is kept totally dry through the curing process (minimum 48 hrs). Please check the floor is tack-free and dry before foot traffic.

Please Note:

Application range: 5°c – 20°c. Areas not to be sealed must be protected with masking materials.

PRO-TIP:

DO NOT OVERAPPLY. The sealer must be applied evenly & thinly. Keep the applied surface area dry for 48hrs to avoid white moisture clouding issues. Please avoid all foot traffic while the sealer is still tacky and drying.

ultra wet look sealer - 5yr performance guarantee

Expected Wear

Under typical conditions, colour protection is guaranteed for 5+ years*. A top-up may be required to maintain a gloss finish due to typical footfall and abrasion. Effectiveness and longevity are reliant on correct application and maintenance. *2 coats required for optimal up-to 5-year protection.

Coverage:

Up to 25m2 per litre per coat.
Depending on surface porosity and texture.

External Chemicals: Handling

Please note, our outdoor chemicals must always be handled with care. Upon receipt of your goods, you should open the packaging in a safe, suitable outdoor environment. Despite our best efforts with robust, layered packaging, there is always a small risk that damage or leakage could occur during transit. Our chemicals have the potential to damage sensitive surfaces if left unattended and we do not recommend that you store them indoors unless specifically indicated.

KEEP OUT OF THE REACH OF CHILDREN AND PETS

H226: Flammable liquid and vapour.
H302: Harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H412: Harmful to aquatic life with long lasting effects.
P102: Keep out of reach of children.
P261: Avoid breathing fumes.
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves.
P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P309+311: IF exposed or if you feel unwell: Call a POISON CENTRE or doctor.

Product SDS sheet available upon request.

Leave us a review

Additional information

Weight 1 kg
Dimensions 14 × 6 × 22 cm
Size Option:

150ml Tester, 1 Litre, 5 Litre

Customer reviews

Rated 4.9782608695652 out of 5 stars
46 reviews
3 stars 0
2 stars 0
1 star 0

46 reviews for Ultra Wet look Sealer

Add a review

Use one of the allowed file type: jpg,png,jpeg. The max size allowed is : 5 MB.

    Title

    Go to Top