Grout Rescue Colour & Seal
£21.00 inc. VAT
Grout Rescue Colour & Seal
Specialist Grout Colourant, Renew, Sealer & Dye
We strongly recommend that you prime the surface with Grout Rescue Pre-Treatment before application for optimum results, whether the grout is new or old.
|Dwell Time:||30-60 mins|
|Application Method:||Sponge / Pad / Brush|
|Safety Data Sheet|
|Technical Application Guide|
Universeal Grout Rescue Colour & Seal Grout Colour Sealer is a great way to restore and renew your wall and floor grout to a better than new condition.
Grout Rescue Colour & Seal grout dye is available in 10 stylish colours, when fully cured, permanently seals the grout to help protect against mould, mildew and staining for up to 15 years.
In many instances when the grout has become permanently stained and no amount of cleaning can bring back the original uniform clean look of the grout. In these cases it is best to apply Universeal Grout Rescue Colour & Seal to restore the grout to a permanently sealed even coloured finish.
Grout Renew to Look Like New!
Our unique grout stain, colourant dye, and sealer can restore even the dirtiest, damaged and ugly grout to a new look finish. This process will permanently colour and seal the grout to make the grout look even better than the day it was installed. Universeal Grout Rescue Colour & Seal Grout Colour Sealer is safe and simple to use, this unique formula allows for easy application by the professional tradesman and DIY homeowner.
Important Note: The colour chart must be used as a guide only. Due to the original Grout colour, texture, grout width, artificial and natural lighting the finished Grout Rescue stain colour may dry slightly different once applied. Always do a small test of our grout stain dye and colourant prior to use to check suitability.
See our Grout Stain in action (HD video)
Directions for use
- This product is a two stage process:
- Stage 1: Pre-treatment is very important to achieve perfect results prior to application of the Grout Rescue Colour Sealer. Prime the grout surface area with Grout Rescue Pre-Treatment on both old and new installations before applying Grout Rescue.
- Stage 2: Make sure the grout joint is clean and thoroughly dry before applying Grout Rescue. Shake bottle & mix well before use.
- Apply product thinly onto the grout joint using a small, stiff brush or sponge working it evenly onto the surface. Wipe away any sealer from the tile surface instantly or within 60 minutes of application.
- For best results apply two coats allowing 1-2 hours drying time between applications. Allow a further 48 hours drying time before wetting (using shower room) or cleaning the treated floor area. If using more than 1 bottle of a single colour for an application, mix all material together to ensure colour match and consistency.
Please Note: Poor application of this grout renew, applying the product too heavy or thickly onto the grout joint can result in blistering, cracking and de-bonding of the colour sealer.
Important notes: This product is not recommended for use around porous surfaces i.e. unglazed tiles and natural stone surfaces as it could permanently stain. The colour chart must be used as a guide only; due to the original grout colour, texture, grout width, artificial and natural lighting the finished Grout Rescue colour may dry slightly different once applied. Always do a small on-site test prior to use.
How to Change Grout Colour with our Grout Stain
Step 1: Prepare the grout surface
Clean the grout first with a grout cleaner to remove the worst dirt and grime that may be present. We recommend Universeal Grout Rescue Pre-treat Cleaner for maximum effectiveness.
Step 2: Apply the cleaner and agitate
Spray in Grout Rescue Pre-treat Cleaner and leave to dwell for the required time. Then agitate with a small brush to clean the grout lines and remove stubborn deposits.
Step 3: Wipe and dry
Using a damp sponge and a clean dry cloth, remove any remaining Grout Rescue Pre-treat Cleaner to make sure the surface is clear of artefacts and completely dry for the next stage.
Step 4: Ready your brush!
With a clean and dry surface, it’s time to apply Universeal Grout Rescue Colour & Seal. Use a small clean brush to get the best results using our grout dye. A disposable toothbrush is an affordable choice for the job.
Step 5: Apply our grout dye and sealer to the grout
Apply Universeal Grout Rescue Colour & Seal liberally to the grout joints with the brush. Don’t worry too much about getting the grout stain and dye onto the tiles, this will be removed safely soon! DO NOT OVER-APPLY, make sure you spread it out thinly and evenly with the brush.
Step 6: Wet and wipe
After leaving Universeal Grout Rescue Colour & Seal to dwell for the required period (up to 60 minutes), wet the tiles with some clean water, ideally from a mist sprayer. Then gently rub over the tiles with a grout scouring pad or non-abrasive scourer.
Step 7: The finishing touches
Wipe the grout colourant residue away with a clean absorbent sponge or cloth. Wipe repeatedly while rinsing with clean water to remove all remaining traces of from grout dye from the tiles and grout. Then buff dry with a soft cloth for a perfect finish!
- Colours and Seals Grout in one application
- Restore even the dirtiest, damaged and ugly grout to a new look finish
- 10 harmonious colours from light to dark
- Suitable for internal & external use
- Up to 15 years protection
A wide range of colour choices
Now, you can colour your grout work with our range of stylish colours, as shown in our swatch set we’ve pre-selected a good range of 10 colours in popular tints.
To avoid disappointment, please note: We do not manufacture sample bottles or provide smaller sizes. The swatches provide a near match to the actual product, however, as you may expect, screen displays and print processes cannot match the colours 100% accurately, so if colour matching is crucial, we recommend you find a stockist and see the product colours in store. We will not be responsible for any colour matching problems as it remains the final responsibility of the user to confirm colour suitability.
3-15m2 per 237ml bottle
This will vary dependent on tile size & grout width.
IMPORTANT: WE ARE UNABLE TO ACCEPT RETURNS OF OPENED PRODUCT. Please ensure you are happy with your colour choice prior to opening the bottle
SUGGESTED FIRST AID PROCEDURES
EYE AND SKIN CONTACT: Flush thoroughly with water, if irritation persists seek medical attention.
IF INGESTED: Drink 1 to 2 glasses of water, do not induce vomiting and seek medical attention.
GROUT RENEW STORAGE INFORMATION
Product shelf life is 36 months when unopened and stored at room temperature. Store product in original container only. Close cap on container after each use. Use only when surface temperatures are between 50° F – 90° F (10° C – 32° C).
Latest Product Reviews…
|Dimensions||5 × 5 × 14 cm|
Black, Dark Grey, Mid Grey, Light Grey, White, Ivory, Limestone, Sandstone Beige, Cappuccino, Chocolate